Urban Fringe and Managed Standard

  1. Path Surface Surface must be hard and firm with very few loose stones (none bigger than 10mm)
  2. Path Width 1200mm minimum width.
  3. Width Restrictions 815mm minimum width for no more than 300mm along the length of path – 1000mm width for no more than 1600mm along the length of the path.
  4. Barriers No stiles, steps, fences, hedges etc., blocking the path.
  5. Ramp Gradient 1:12 maximum.
  6. Rise of ramps Where the place is steeper than 1:20 (i.e. a ramp), a level, resting place should be provided. The maximum height rise between landings is 830mm.
    Maximum distance between landings for 830mm vertical climb
    Gradient Max Distance between Landings
    1:18 14.94
    1:16 13.28
    1:14 11.62
    1:12 9.9
  7. Cross Slope 1:45 maximum.
  8. Steps 10mm maximum.
  9. Surface Break Breaks in path surface as in boardwalks, grates, grills etc., should be no more than 12mm measured in the direction of travel along the path.
  10. Clear Walking A tunnel clear of overhanging or encroaching
  11. Tunnel vegetation, and other obstructions should be a minimum of 1200mm wide and 2100 high.
  12. Passing Place There should be a passing place every 100 metres along the path. The minimum width of the path should be 1500mm for 2000mm along the length of the path.
  13. Resting Places There should be a resting point every 200m along the path. Each resting point should have a seat or perch which is placed on surfaced, level ground. Resting points should be set back from the path and, in addition to the path width, be at least 1200mm wide and 1500mm long.

Comments Off on Urban Fringe and Managed Standard